This cylinder belongs to a pull cylinder of which the total stroke is equal to the sum of a swing stroke and a clamping stroke, and is usually used within the clamping stroke.

Double Piston Cylinder: This cylinder consists of two or more cylinder mounted in line with piston connected to the common piston rod.

Back to Back Cylinder: This cylinder comprises of two standard cylinder mounted back to back and connected by a support or tie rods. This arrangement provides:
» Three positions if the two cylinders have the same strokes.
» Four stroke if the two cylinders have different strokes.

The Tandem cylinder arrangement can provide the amplified output as compared to the conventional cylinder. A tandem cylinder is used in place where a greater force needs to be developed in a actuator of small diameter. The typical application for the tandem cylinder are found in work holder devices and Lathe equipments.

We are instumental offering Pneumatic Panel, which find application in pressurize systems. These precisely-engineered panels are energy efficient and have gained acclaimation for a trouble-free performance and durability. Our expertise allows us to design these panels as per the specific requirements of our clients. The Pneumatic panel is used to operated the Pneumatic actuators. It takes typical shop air Pressure and regulated it according to the need of equipment.
There are various sizes available such as 9" x 9", 12"x 12" and 15"x 15".